NDE
Managing Orphaned Welds with the ORPH Test Pack
Overview In WeldTrace, maintaining a precise and unbroken history of non-destructive examination (NDE) and testing data is critical for compliance and project tracking. Previously, when a weld with active or requested test data was removed from a ...
Revise a Test Pack
The revise button in the test pack view page will open up a new page, which will look similar to a test request create screen. Through this method, you may select a weld to be tested again. Revise a test pack The test pack number; The test request ...
Enter Test Results
When you click on the "Enter Results" button for a test pack, you will reach this page where you can enter the test results for the welds. Enter test results The test pack number; Details of the test pack; List of welds in the test pack. Only the ...
NDE Request Details
Test Request Details Test pack details The test pack number and the status; Enter Results - click to open the interface to enter the test results for the welds in the pack; Print the test pack to a PDF file; Revise the test pack; View the revision ...
Create a NDE Request
Selecting Welds Manually for Testing The welds listed for selection will be based on the project configuration for NDE ("Completed welds only" or "All welds"). In either case only those welds that are not in any other test pack will be listed for ...
NDE
Test Packs List In the NDE section you will be able to create requests for non-destructive testing of welds, enter results, retest, apply penalty, select tracer and monitor the progress of the packs. You will be able to group welds and create test ...